Here you find a video and a description of how to remove and install the battery of your Ekano 2 AL.

Important: When installing the battery, the lock must be opened with a 4 mm Allen key. Otherwise, there is a risk of damaging the lock.

You can also find detailed instructions here:

Dismounting the battery pack:

1. Insert a 4 mm hex key into the opening above the battery cover and turn it clockwise half a turn. The battery pack falls into the latch of the removal position.

2. Grasp the battery lock with one finger and press the release lever to the left. The battery can now be removed downwards.

Mounting the battery pack:

1. Place the lower end of the battery on the lower guide and swing the battery up until you hear a click. The battery is now locked to prevent it from falling out.
2. Insert a 4 mm hex key into the opening above the battery cover, turn it clockwise half a turn and hold it in this position.
3. Push the battery completely into the down tube and remove the hex key.
4. Check the tight and secure fit of the battery.

If you have further questions, you can also use our chat or write an email to service@propain-bikes.com.