This FAQ answers the most common questions regarding the frame, geometry, colors, suspension, drivetrain, seat post, brakes, and tires of the Spindrift 5 AL. It is aimed at our customers and serves as a quick reference – for individual installation and safety questions, we also recommend contacting a specialist workshop or our support team.
Q: What frame sizes are available and what height corresponds to which size?
A: The Spindrift 5 AL is available in four frame sizes. The ranges intentionally overlap: the smaller size offers a more playful ride, while the larger size provides a steadier experience. The exact allocation is shown in the following table:
| Frame Size | Height | Riding Behavior |
|---|---|---|
| S | 158–172 cm | playful |
| M | 168–182 cm | balanced |
| L | 178–192 cm | balanced |
| XL | 188–202 cm | stable |
Note: If you have questions about the appropriate frame size, our support team is happy to assist you – especially if you are between two sizes.
Q: What material is the frame made of?
A: The frame of the Spindrift 5 AL is made from a blend-alloy construction (aluminum).
Q: What wheel sizes is the bike compatible with?
A: The Spindrift 5 AL can be configured with either 29 inches, in a mixed setup (MX, 29" front / 27.5" rear), or fully with 27.5 inches.
Note: Unlike the Spindrift 5 CF, the AL frame does not have a flip-chip. The wheel size is not adjusted via geometry adjustment.
Q: How much suspension travel does the Spindrift 5 AL have as standard?
A: As standard, the bike features 180 mm of suspension travel both front and rear. The fork can accommodate a maximum of 200 mm of suspension travel (see section "Suspension").
Q: How is the cable routing managed?
A: Cables and lines are routed internally and along the side of the down tube.
Q: What is the maximum system weight allowed?
A: The maximum allowable total weight (rider, bike, and luggage combined) is 120 kg. The Spindrift 5 AL is classified in category 5.
Note: Safety notice – Please read the instructions included with the bike before first use. Exceeding the allowable system weight may impair riding safety.
Q: What additional features does the frame offer?
A: The frame features double-sealed stainless steel frame bearings, down tube and chainstay protection, as well as a bottle mount.
Q: What dropout standard is used?
A: The rear end is designed with 148 x 12 mm (Boost). A Sixpack UDH axle with SRAM UDH derailleur hanger (Universal Derailleur Hanger) is used.
Still have questions?
This FAQ covers the most common technical questions regarding the frame & sizes of the Spindrift 5 AL. For individual questions about installation, compatibility, or safety-related topics, feel free to contact a specialist workshop near you or directly reach out to our Customer Success Team – we are happy to help.