Here you will find a video and a description of how to remove and install the battery of your Ekano 2 AL / Sresh CF.

IMPORTANT: When installing the battery, the lock must be opened with a 4 mm Allen key. Otherwise, the lock may be damaged.

You can also find a detailed guide here:

Removing the battery

1. Insert a 4mm Allen key into the opening above the battery cover and turn it half a turn clockwise. The battery will fall into the lock of the removal position.
   
   
    
2.  Use your finger to press the battery lock and push the release lever to the left. The battery can now be removed downwards.
   
   
    

Installing the battery

1.  Place the lower end of the battery onto the lower guide and swing the battery up until you hear a click. The battery is now locked in place to prevent it from falling out.
    
2. Insert the 4mm Allen key into the opening of the battery cover, turn it half a turn clockwise and hold it in this position.
    
3. Press the battery fully into the down tube and remove the Allen key.
    
4. Check that the battery is securely and firmly seated.
   
   
   
   
    

If you have any further questions, you can also use our chat or send an email to service@propain-bikes.com.