For most models, the wheel size cannot be adjusted. However, with the Rage 3 CF, Tyee 6.1, and Spindrift 5 CF, we offer the option to adapt the geometry to different wheel sizes via a flip chip. On these bikes, you can choose to install either a 29" or a 27.5" rear wheel and switch between full 29 and mixed wheel setups.

With the Ekano 1 AL, Ekano 2 CF, Sresh CF, and Sresh SL, this is theoretically also possible; however, the wheel circumference must then be adjusted in the motor. This can only be done by us. On the Ekano 1 and Rage 3 CF, the dropouts also need to be converted.

The Yuma 3 can be fully converted from 24" to 26" to adapt it to the rider’s height. With the Yuma 4, changing the wheel size is no longer possible; however, it is available in either 24" or 26".